Top Left Background Image   Top Right Background Image
Did you find what you need?
  
 

KADT-LED


LED Contour® Soft Square


Bookmark and Share
Intended Use

Ideal for parking areas, street lighting, walkways and car lots.

Construction

Rugged, die-cast, soft corner aluminum housing with 0.12" nominal wall thickness. Die-cast door frame has impact-resistant, tempered glass lens that is fully gasketed with one-piece tubular silicone.

Strut: Aluminum tension rod provided as an architectural element. Not designed as a weight-supporting device. Fixture mounts 11.27" lower on the pole.

Finish: Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mm thickness for a finish that can withstand extreme climate changes without cracking or peeling. Standard Super Durable colors include dark bronze, black, natural aluminum and white. Available in textured and non-textured finishes.

Optics

Precision acrylic refractive optics for optimum light distribution through the flat glass lens. Available with Type 2, Type 3, Type 4 and Type 5.

Electrical

High-efficiency nominal 4000K, 65 CRI LEDs mounted to a metal-core circuit board and aluminum heat sink, ensuring optimal thermal management and long life. Designed to provide more than 60,000 hours of performance (L85) at 250C (770F) ambient temperatures. Standard and dimming drivers are available in 120-277V and 347-480V; 50/60 Hz. Drivers have power factor >90% and THD <20%. Expected driver life is over 60,000 hours, matching the light engine life. Integral surge protection tested in accordance with IEEE/ANSI C62.41.2 to Category C Low.

Installation

Extruded aluminum arm for pole or wall mounting.

Listings

CSA certified to U.S. and Canadian standards. IP65 rated.

WARRANTY: Five-year limited warranty.

Bottom Left Background Image   Bottom Right Background Image