Architectural luminaires for general illumination in rough service (vandal-resistant) wall or ceiling-mount applications. Ideal for interior or exterior applications where safety and security are a concern. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables for suitable uses.
Bezel: One-piece, die-cast aluminum, low copper alloy (<1% copper), .125" thick. Secured to housing with stainless steel Torx® T10 set screws (two included).
Finish: Standard finish is textured polyester powder coat.
Housing: One-piece, die-cast aluminum, low copper alloy (<1% copper), post-painted in textured polyester powder coat. For use directly over outlet box or conduit entry (1/2" and 3/4" threaded opening).
Gasket: Polycarbonate: Perimeter lens gasket is one-piece silicone "O" ring. Glass: Perimeter lens gasket is closed-cell silicone. Pad mounting gasket (closed-cell neoprene) seals housing to mounting surface.
Lens: Translucent white, injection-molded, UV-stabilized polycarbonate, .125"
thick. Smooth exterior for easy cleaning. Interior pattern diffuses light for
uniform surface illumination. Optional borosilicate glass lens available (.250"
Reflectors: High-gloss white powder coat finish for maximum light output.
Lamps positioned for uniform brightness and illumination.
Ballast – CFL: Class P, electronic, HPF multi-volt. <10% THD with starting
temperature of 0°F. HID: High reactance, HPF, starting temperature -20°F (MH) or
Socket – CFL: High-temperature thermoplastic with lamp retention clip. HID:
Medium-base 4KV rated porcelain.
Lamps - LED: 3500K standard (4100K also available). CFL: 35K 4-pin lamp(s)
standard. HID: Reduced UV lamp is standard. Lamps included unless L/LP is
UL Listed to US and Canadian safety standards (see Options). UL Listed for 25°C ambient and wet locations. IP65 rated.